Produse
0728 405 405
Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8 Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8 Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8 Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8 Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8
Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8
Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8
Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8
Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8
Sierra ModellSport - Receptor RadioMaster R81 compatibil FrSky D8

Receptor RadioMaster R81 compatibil FrSky D8

RadioMaster R81 Nano Receiver
Size: 17 x 11 mm
Weight: 2 g
Channels: 8CH
Frequency range: 2400-2483.5Mhz

Cod produs: SHP157/RX/R81

Disponibilitate: In Stoc

Pret: 77 Lei

Prețul include TVA.

Adauga în coș
Recomandă unui prieten
RadioMaster R81 2.4GHz 8CH Over 1KM SBUS Nano Receiver Compatible FrSky D8 Support Return RSSI for RC Drone
 
Specifications:
Brand Name: RadioMaster
Item Name: R81 Nano Receiver
Model: R81
Size: 17 x 11 mm
Weight: 2 g
Channels: 8CH
Frequency range: 2400-2483.5Mhz
Power input range: 4.5-6V
Signal format: FrSky D8 Compatible
Output format: SBUS
Support return: support return RSSI
Control distance: more than 1km
Antenna length: Approximaltly 6cm
 
Bind method:
1. Press and hold the BIND button on the receiver then connect power. After approximately 3 seconds, the receiver LED will be RED, the receiver is now in bind mode
2. Select the D8 protocol for the multi-protocol menu of your remote control, and press the [BIND] option, the red light of the receiver will flash indicating successful bind
3. Exit bind mode on your remote control and disconnect power to the receiver then power the receiver once more. The LED will now be solid RED indicated the bind is now done. If not please repeat step 1 and 2
 
Fail-safe Protection:
1. Press the BIND button once within 10 seconds of th eceiver being powered on, and the receiver will save all the current channel values of the remote control as the fail-safe value
2. 10 seconds after the receiver is powered on, the BIND button function will be disabled to prevent accidental changes to to the fail-safe settings while preparing the model for flight
 
RSSI output:
This receiver has a total of 9 channels. 8 channels + an RSSI output channel. 
Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver itself, which can be read by the flight controller and sent to the OSD device Show signal strength.
 
Included:
1 x R81 Nano Receiver

 

Nu există piese de schimb asociate acestui produs.

Dacă ai vreo întrebare legată de acest produs, te rugăm sa completezi formularul de mai jos și în cel mai scurt timp vei primi un răspuns avizat de la personalul nostru calificat.


Eroare!